This product is no longer promoted on Made-in-China.com. If you find any infringement or sensitive information of it, please contact us for handling. Thank you.
  • Scraping Auto Self-Cleaning Filter
  • Scraping Auto Self-Cleaning Filter

Scraping Auto Self-Cleaning Filter

Contact Supplier

Gold Member Since 2006

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
TP0428-3
Transport Package
Wooden Package
Specification
Customized
Origin
China

Product Description

Scraping Auto Self-Cleaning Filter

Product Introduction
TPX series self-cleaning filter (TPX Filter for short), is the high efficiency scraping self-cleaning filter removing the impurities particles on the filter element outside by mechanical scraping, it continuously filters on-line. TPX filter is designed for fine and accurate filtration ranging from 50-500 micron. It can avoids extruding and breaking the impurities and is capable of the filtration for water and liquids viscosity up to 800000cps.
Working Principle
The liquid enters the filter from the inlet(1), flows through the filter element(6) from outside to inside. The filter element bottom is connected to the outlet(2), through which the liquid flows out. After the filter element captures the impurities, the cleaning action is trigger by the preset time or differential pressure value. The gear motor(4) drives the scraping blades(7) to rotate and remove the impurities on the filter element outside surface. The impurities moves off along the blades and falls down to the filter bottom. The rotating plates push the gravity impurities into the collection chamber(5). The impurities are collected at the filter bottom and in the collection chamber. The discharging valve open per the preset time and discharging the waste liquid with high impurity concentration through the drain outlet(3), the purged liquid can be reclaimed if necessary.
Technical Features and Advantages
Automatic 24-hour on-line filtration, no frequent changing out and cleaning
No disposable filter media consumption, save filter media cost and environment cost
Stainless steel scraping blade, good impurity removing performance
Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap
Very low pressure drop, stable flowrate, save energy consumption
Close filtration, no dangerout liquid leakage, good for safe production
Discharge waste liquid with high impurity concentration, avoid valuable liquid loss
Equipped with world-famous gear motor, high reliability and long service life
Main technical parameter
Model
TPX11
TPX22
TPX34
TPX75
TPX100
TPX136
Filter area(cm2)
0.11
0.22
0.34
0.75
1.00
1.36
Volume (L)
16
30
50
145
195
320
Inlet/Outlet (mm)
DN40-DN50
DN50-DN80
DN50-DN100
DN65-DN100
DN80-DN125
DN100-DN150
Drain outlet (mm)
DN40
DN50
Applicable liquid
Viscidity (<800000cps), Impurity<1000ppm
Filtration Precision
50-500μm
Std design P
1.0MPa( High design pressure available)
Designed temp.
0-200ºC( Determined by the seal material)
Cleaning pressure diff.
0.05MPa
Diff pressure switch
Differential pressure transmitter(DPT) or Differential pressure switch(DPS)
Gear motor
180W,380V, IP55
Filter element type
V-SLOT, 316L
Housing material
304/316L/CS
Scraping blade material
304/316L
Seal material
NBR/VITON(FKM)
Discharging valve
,IP65 Pneumatic ballvalve, protection class IP65
Supply facility
380V AC,0.4-0.6MPa ( Clean and dry compressed air)

Send your message to this supplier

*From:
*To:
avatar Mr. Kent Gong
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now