Customization: | Available |
---|---|
Type: | Waste Water Filter |
Usage: | Environmental Protection, Chemical Industry |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Waste Water Self-Cleaning Filter
Mechanical Internal Scraping Self cleaning Filters, a new generation self-cleaning filtration system independently designed by TOP MACHINARY, is integrated with a number of slotted filter elements. It is especially designed for customers who take good quality and high eliability into consideration firstly.
Compared with ordinary mesh type self-cleaning filter, this filter has below advantages:
1) The treatment capacity and components are customized according to different requirements.
2) It can remove sand, grain and other impurities efficiently and finally protect the back-end equipment from clogging.
3) This filter is equipped with intelligent control box. It's easy for you to select control mode: pressure, time, manual and PLC.
4) The filter uses wedge wire screen as element. It has high mechanical strength and filtration area. Its slot size can reach 15 micron.
5) The cleaning time can be changed according to your requirements and it will not make the filtration stop at the same time.
Model | TPX11 | TPX22 | TPX34 | TPX75 | TPX100 | TPX136 |
Filter area(cm2) | 0.11 | 0.22 | 0.34 | 0.75 | 1.00 | 1.36 |
Volume (L) | 16 | 30 | 50 | 145 | 195 | 320 |
Inlet/Outlet (mm) | DN40-DN50 | DN50-DN80 | DN50-DN100 | DN65-DN100 | DN80-DN125 | DN100-DN150 |
Drain outlet (mm) | DN25/40 | DN50 | ||||
Applicable liquid | Viscidity (<800000cps),Impurity<1000ppm | |||||
Filtration Precision | 20-500μm | |||||
Cleaning pressure diff. | 0.05MPa | |||||
Diff pressure switch | Differential pressure transmitter(DPT) or Differential pressure switch(DPS) | |||||
Gear motor | 180W,380V, IP55 | |||||
Filter element type | V-SLOT, 316L/304 | |||||
Housing material | 316L/304/CS | |||||
Scraping blade material | 304/316L | |||||
Seal material | NBR/VITON(FKM) | |||||
Discharging valve | Pneumatic ballvalve/ Electric ball valve |